Tormax Telescopies درب اتوماتیک شیشه ای تورمکس چندلنگه تلسکوپی

 

TORMAX iMotion® Telescopic Door Drive

Automatic sliding door drive for single or double-leaf sliding doors, standard or telescopic, door leaf weight 2 x 130 kg, 1 x 150 kg, telescope 4 x 80 kg, 2 x 100 kg.
Cross section header profile (H x D) 200 x 155 mm, telescope 200 x 245 mm

( _ ) Electromechanical sliding door drive with wear-free synchronous motor technology and processor control. Gearless, low-maintenance AC motor. Mains supply
115 VAC/60 Hz or 230 VAC/50 Hz, protective system IP22, ambient temperature
–20 °C to +50 °C. RoHS conformity (EC directive 2002/95/EG).
Double rollers with groove for ideal load distribution and integrated unhinging protection, easily replaceable low-noise guide rail.

Control System

Automatic detection of system-specific data for constant motion control, permanent operating diagnosis, electronic obstacle recognition in closing and opening directions. Automatic speed limit, including in the event of power failure and in manual mode. Emergency opening for autonomous door opening in the event of power failure in the unlocked state. 32 Bit/30 MHz processor for high performance. Interfaces: LIN BUS, CAN BUS, RS 232

User interface with fault diagnosis and code lock. Selectable operating modes: OFF, AUTOMATIC 1, AUTOMATIC 2, EXIT , OPEN and MANUAL. Variable motion parameters for opening and closing speed, hold-open times, motion control, reduced opening width. Freewheeling function and reset selectable on operating unit.
8 inputs (4 testable safety devices) optionally for emergency opening/closing, manual operation (flush position), operating modes.
3 programmable outputs (optional feedback signals for different door statuses,
such as: Closed, Open, Fault, Lock status, Light pulse, Gong pulse).


Door leaves

( _ ) Sliding leaf
( _ ) Stationary lateral components
( _ ) Stationary fanlights, ( _ ) -part

Profiles

( _ ) TORMAX Profile System LR 12
Single-sheet glazing
Glazing thickness 6 – 12 mm
Type of glazing: wet, single-sheet/compound toughened safety glass
Facial width 22 mm, base height 80 mm, profile depth 20 mm

( _ ) TORMAX Profile System LR 22A
Single-sheet and insulating glazing
Glass thickness dry 8.5 – 10 mm, 21.5 – 23 mm, wet 6 – 28 mm
Facial width 30 mm, base height 78 mm, profile depth 34 mm

Glazing

( _ ) Single-sheet safety glass 10 mm, heat soak tested
( _ ) Compound safety glass 10 mm, with 0.78 mm film
( _ ) Insulating glass comprising 2 x 5 mm single-sheet safety glass,
heat soak tested, 22 mm
Overall thickness, Ug 1.3 W/m2K
( _ ) Insulating glass comprising 2 x 6 mm compound safety glass, film 0.78 mm, 22 mm
Overall thickness, Ug 1.3 W/m2K
( _ ) Make…………


Sensors

Activation
( _ ) Radar
( _ ) Active infrared
( _ ) Passive infrared
( _ ) Contact-free hand switch
( _ ) Manual hand switch

Safety facility
( _ ) Dynamic safety (with/without testing)
( _ ) Static safety (with/without testing)
( _ ) Combined detector/alarm (radar and 3D protective light curtain AIR) with testing

Safety assessment conforming to DIN 18650 recommended.

Accessories

( _ ) User interface with 7-segment display and 2-button operation, 45 x 45 mm suitable for Legrand system
( _ ) 3-position mode switch mounted in plastic case
45 x 45 mm, suitable for Legrand system
( _ ) Monitored battery module for emergency power supply
( _ ) Electromechanical lock (bistable lock) with feedback, acting only on hardened holding bolts of the leaf, not acting on the toothed belt or deflection pulley
( _ ) Emergency opening including burglary protected emergency unlocking
( _ ) Emergency opening monitoring facility
( _ ) Emergency OFF switch, optionally surface-mounted or flush-mounted,
with glass cover and frame
( _ ) ……….